MyTek
MWA-105 Access Point
Communication Ltd.
Version: 1.1
Password
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
Service Name
Fill in the service name of Service Name. The default
value is empty.
Connection Type
Select the connection type from pull-down menu. There
are
Continuous
,
Connect on Demand
and
Manual
three
types to select.
Continuous
connection type means to setup the
connection through PPPoE protocol whenever this
WLAN Broadband Router is powered on.
Connect on Demand
connection type means to setup the
connection through PPPoE protocol whenever you send
the data packets out through the WAN interface; there are
a watchdog implemented to close the PPPoE connection
while there are no data sent out longer than the idle time
set.
Manual
connection type means to setup the connection
through the PPPoE protocol by clicking the
Connect
button manually, and clicking the
Disconnect
button
manually.
Idle Time
If you select the
PPPoE
and
Connect on Demand
connection type, fill in the idle time for auto-disconnect
function. Value can be between 1 and 1000 minutes.
MTU Size
Fill in the mtu size of MTU Size. The default value is
1492. Refer to 4.23 What is Maximum Transmission Unit
(MTU) Size?
Attain DNS
Automatically
Click to select getting DNS address for
PPPoE
support.
Please select
Set DNS Manually
if the
PPPoE
support is
selected.
Set DNS Manually
Click to select getting DNS address for
Static IP
support.
DNS 1
Fill in the IP address of Domain Name Server 1.
DNS 2
Fill in the IP address of Domain Name Server 2.
DNS 3
Fill in the IP address of Domain Name Server 3.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
MyTek Communication Ltd. Tel: (36-1) 347-0446, (36-1) 280-9397
Vörösmarty utca 79. Budapest Fax: (36-1) 347-0447
Hungary H-1201
http://www.mytek.eu
33
