Warranty
12
11
THIS PRODUCT WAS MADE BY MYTEK A COMPANY SPECIALIZING IN
HIGH END STUDIO EQUIPMENT. OTHER MYTEK PRODUCTS INCLUDE
AD2021 AND D-DAC20 20 BIT CONVERTERS, WORKSTATION 20 BIT
AD/DA INTERFACE, 8X20 SERIES 20 BIT CONVERTERS FOR ADAT AND
TASCAM, THE PRIVATE Q MULTICHANNEL HEADPHONE SYSTEM, A
SONY-SSL-LYNX
TRANSPORT
INTERFACE,
THE
DIGIPOT-
DIGITAL
MOTORIZED OPTICAL POTENTIOMETER AND OTHER PRODUCTS. PLEASE
CALL MYTEK AT 212-388 2677, FAX TO: 212-686 4948 OR WRITE TO: PO
This digital meter is warranted by Mytek to the original purchaser, against defects in
workmanship and materials used in manufacture for a period of one year, from the date
of shipment.
Faults due to purchaser misuse, unauthorized modifications or accidents are not
covered by this warranty.
No other warranty is expressed or implied.
Any faulty unit should be sent, shipping prepaid, to the manufacturer. the serial number
of the unit should accompany any request for service.
This digital meter ser#___________________________was sold to:
_____________________________________________________________________
on_______________________________
authorized signature________________________
For technical support in the US call:
212-388 2677
or email: [email protected]
Overseas contact your dealer.
V3.3- OVER light as 0 dB
- In this mode the Over light is
always triggered when ONE or more samples are over
(=7FFF). The counter however is still triggered depending
on how you set the switches 5 and 6. This mode allows you
to push the program level up a bit because now meter
recognizes the difference between over and 0 dB. Now you
can use the counter as an overload indicator and over led as
a 0 dB level indicator.
ON
1
4
3
5 6 7
2
OFF
6
