14
Mytek Brooklyn ADC
8. Menu
8.1 Menu Navigation
The four buttons, one encoder and the high-resolution display enable the user to quickly change and
configure the device’s settings. There are always four parameters fields shown at the bottom of the
display. There are also 4 pushbuttons, each corresponding to one parameter field.
To change a parameter in one of the 4 fields shown on the display, press the corresponding button.
This will highlight the field in the colour of logo. To change the value rotate the knob until you see the
option / value you need. Pressing the button again unhighlights the field. When no field is highlighted,
turning the knob, turns the menu page to next one showing next set of control fields.
Turn the knob round to navigate between all available parameters.
Press and hold the knob to switch the Brooklyn ADC off / on.
