Mytee HP100 Grand Prix, Руководство пользователя

Страница: 8 / 15

#1 Turn on pump switch. Take the hand tool and hold it over the opening of the
solution tank. Pull the lever on the hand tool so that the valve is now open and
fluid can start flowing through the machine and hoses. You will notice air coming
out at first. This is normal. Keep the line open until there is no more air, and
solution if flowing steady. This is called priming the pump. It may take up to 2
minutes.
#2 Turn on heater switch. This is your heater and should remain on for the entire
time you use the machine. You will know the heater is on because the switch will
illuminate.
#3 Turn on vacuum switch. With the upholstery tool in hand you may begin
cleaning. By pulling the trigger, you will dispense the solution onto the desired area.
Because the vacuum is on, the fluid will quickly be sucked back into the hand tool.
You will notice that the area you have just cleaned will be damp. This is normal. To
speed up the drying process, use the model A9700, Mytee Dry airmover.
OPERATION
HP60/ HP100/
K100HP
7