Mytee ECO-15-24VDC Скачать руководство пользователя страница 2

Страница: 2 / 18

INTRODUCTION

Dear Customer:
Congratulations on the purchase of your new Battery Orbital All-Surface Floor

Machine.
As technology continues to develop you can work confidently knowing that

both Mytee Products and its employees are equally dedicated to developing

with the industry and its advances.
Like any other piece of machinery or technology, the ECO-15-24VDC also re-

quires proper maintenance and care to keep the product working over extend-

ed use. Neglecting your machine, abusing it or not operating it properly can

void its warranty and prevent the machine from performing to the quality and

standard you’d expect out of the Mytee Products line.
If you have any warranty concerns or questions, please review this manual

thoroughly or do not hesitate to contact your distributor. If there are questions

regarding maintenance, replacement, or ordering parts please contact an

authorized Mytee Products Service Center. To see an updated list please visit

our website at http://www.mytee.com/support/service-centers.
Before using your Mytee product, please read this manual thoroughly.
Sincerely,

Mytee Customer Care Dept.

Содержание ECO-15-24VDC


















