09
HI-LINE RC & HI-LINE RC Heater/Cooler
11.0 Operating Instructions
Description
This HI-LINE unit is fitted with a control system that provides
either automatic or manual control of the unit. In automatic
mode the desired temperature set point is selected and the unit
will adjust the fan speed according to the difference between
the actual room temperature and the set point. When the room
temperature reaches the set point the fan will switch off and
thereafter will continue to cycle on and off to maintain the room
temperature. The temperature set point range is 59 - 95°F.
In manual mode the automatic temperature control is over
ridden and any of the three fan speeds can be operated
inrespective of the water temperature in the unit. This means
that air circulation can be provided in summer for example, or
that heating performance can be controlled manually.
In manual mode, with water temperature control, any of the 3
fan speeds can be selected and the fan will operate when the
water temperature in the coil is greater than 90°F. This means
that heating performance can be controlled manually, and the
unit could be controlled via an external room thermostat.
The unit can be controlled using the infra red remote control
handset supplied with the unit (see fig. 6) and also using the
control panel on the unit (see fig. 7). If necessary, however, the
control panel can be locked electronically to prevent tampering
once the controls have been set (see over).
The remote control hand set takes 2 AAA batteries (not supplied).
Fig. 6
Fig. 7
Controls
Display
Power button
Switches unit on & off
‘+/-’ button
Adjust temperature set point from
59 - 95°F
Scrolls into F1, F2, F3, A1, A2 or A3
manual mode.
Heating
Heating will only be provided when the central heating boiler is
on, the pump is running and the system water temperature is
greater than 90°F. Ensure the boiler is on, and set timer, boiler
controls and room thermostats as necessary.
10.0
11.0
24392 HiLine manual_Layout 1 22/12/2011 11:07 Page 10
