Step 1. Remove the two mounting
screws on both sides of the radio
Step 2. Remove the factory mounting
brackets
Step 1a. Remove factory radio
and disconnect .
Step 3. Use the supplied 6mm screws
to instal the factory brackets on the new
unit.
Remove the OEM Radio and prepare the Myron and Davis Unit for installation by
following the steps below.
Note
: Inspect all fasteners and brackets for damage. Replace as necessary before the
installation process is started
5 – Remove Factory Radio
Note:
Use supplied screws when installing the mounting brackets on the Myron
and Davis unit. Failure to use the supplied screws will result in loss of warranty!!!
