EN MY4301&MY4302 - User manual
17
To press
“
+
”
or
“
-
”
button to set the heater operation time between 1 and 24 hours. This function
will activate once the timer icon stops blinking.
The heater will automatically turn-off when time runs out. If it was set to be 10 hours, the heater will
stop heating after 10 hours.
4
、
Then press
“
MODE
”
again, the heater enters into “
SET TIMER (AUTO-ON)”
status
To press
“
+
”
or
“
-
”
button to set the heater operation time between 1 and 24 hours. This function
will activate once the timer icon stops blinking.
The heater will automatically turn-on when time runs out.
If it was set to be 1 hour, the heater will start heating after 1 hour.
5
、
After all, press
“
MODE
”
again, the heater will be back to STEP 2 status.
6
、
Under STEP 2 status, the heater is heating with POWER III.
Now, press
once
，
The heater will heat with POWER II;
OR press
twice
，
The heater will heat with POWER I;
OR press
three times, The heater will be POWER OFF.
Following are the status of Screen under Heating Power with III, II and I.
III II I
CARE AND CLEANING
:
Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the “O” OFF position and the Power Cord is unplugged from the electrical
outlet before cleaning the product.
•
Always ensure the product’s housing is intact and completely assembled before each use.
•
Do not touch hot surfaces. Always use the handle of the product. Use protective mitts or gloves
to avoid serious burns or other personal injury.
•
Clean the exterior surface of the product by wiping it with a soft, damp cloth.
:
Do not allow water or other liquids to run into the interior of the product, as this could create a
fire and/or electrical hazard.
•
Do not use any abrasive cleaners or solvents, as product damage will occur.
•
Store the product in a clean, dry place when it is not in use.
MAINTENANCE:
1. Always disconnect the appliance and let it completely cool before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never immerse the
unit in water, nor let water drip into the unit.
SET TEMPERATURE
MODE
F/C
+
-
Press the switch
button, the heater enters into standby mode,
By now, if the ambient temperature was below 4
℃
, the heater can automatically start heating
function;
1
、
Press the switch
button, the heater enters into standby mode, the screen blinks at 1 second
interval.
；
2
、
Then press the “MODE” button, the heater enters into heating status. The screen blinks at 1
second interval.
；
2.1
、
Press the “
+”
or “
-”
button to set the desired temperature from 13 to 30
℃
.
For example, press
“
+
”
one time to set temperature to be 25
℃
.
For example, press
“
-
”
one time to set temperature to be 23
℃
.
2.2
、
Meanwhile, you can press
“℉
/
℃”
button to convert Fahrenheit degrees and Celsius degrees.
Following is the screen of 24
℃
converted to be 75
℉
3
、
Then press
“
MODE
”
again, the heater enters into “
SET TIMER (AUTO-OFF)”
status
POWER
Содержание MY4301
Страница 20: ...EN MY4301 MY4302 User manual 20 ...
