Myray Hyperion X9 Pro, Инструкция по эксплуатации

Страница: 7 / 15

3
hyperion X9 pro - Instructions for R ► L CEPH arm swap
EN
GENERAL WARNINGS
1. GENERAL WARNINGS
1.1 FOREWORD
The device described in this manual is manufactured by CEFLA s.c. - via Selice Provinciale 23/A - 40026 Imola (BO)
Italia, which is the manufacturer, in compliance with the applicable European Directives detailed in the declaration of
conformity.
These technical instructions are addressed to the personnel in charge of repair and/or maintenance operations of
CEFLA s.c. equipment and contain all the necessary information.
CEFLA s.c. shall be responsible for the safety, reliability and efficiency of the equipment provided that:
• installation, any modifications, settings or repairs are made by authorised technical personnel using CEFLA s.c.
original spare parts
• In case of installation in medical locations: the electrical installation of the relevant location complies with IEC 60364-
7-710:2002 Standards (Standards on electrical installations of medical locations) or with the equivalent Standards in
force in the country of installation
• the equipment is used as outlined in User Manual
• in case of installation of an X-ray unit: The room where the X-ray unit is installed complies with the official Directives
on protection from radiation in the country of use
1.2 SAFETY INSTRUCTIONS
All the safety instructions that help prevent any hazardous situations and operate the equipment in a trouble-free
manner are given in the user’s manual as explained below:
SYMBOL DESCRIPTION
ATTENTION: General mandatory action sign
ATTENTION: Wear protective gloves
ATTENTION:
Wear foot protection
ATTENTION: Use protective eyewear
ATTENTION: Use protective clothings
ATTENTION: Connect an earth terminal to the ground