8
EN
hyperion
X5 2D/3D
- TECHNICAL MANUAL
EN
PC CONFIGURATION
3. PC CONFIGURATION
3.1 SYSTEM REQUIREMENTS
The device works with 2 Ethernet connections, one for generic communication with the PC (that can be connected to a
local area network and works in DHPC) and another one, which must absolutely be point-to-point, dedicated to image
acquisition from the 3D panel, therefore connecting the device to the INTEL PRO 1000 network card of the computer.
The computer dedicated to image acquisition (from now on “Acquisition Server”) must have MANDATORY requirements.
Refer to the user manual of the iRYS (chapter 2.3) for the minimum requirements of the pc clients not directly connected
to the machine.
3.2 PRELIMINARY OPERATIONS
The Acquisition Server must comply with the above-mentioned requirements. If it is supplied by Cefla, the entire
hardware will already be assembled and the entire software will be installed. Otherwise, it will be necessary to assemble
a PC that complies with the specifications and install the entire software autonomously.
The 2 PC network cards will be needed for the communication between device and PC and for the connection between
Sensor and PC. The latter connection is carried out by means of a dedicated network card (INTEL PRO 1000) that
must be compulsorily used and needs a free PCI-E slot on the PC motherboard.
The operating system of the acquisition server is compulsorily WINDOWS 7 PRO 64 bit or WINDOWS 8.1 64 bit. Once
installed, make sure that all the peripheral drivers are properly recognised.
The Intel PRO 1000 is automatically detected by the operating system and installed with the corresponding drivers
(that have to be updated).
The acquisition server needs an account with the administrator rights.
WARNING: for the video card drivers, use the pack available on the Extranet.
During video driver installation, the .NET Framework 4.0 libraries will be installed too, which are essential to install the
software. Make sure that the list of the programmes installed on the pc contains the following items:
If, for whatever reason, such items are not installed, they may be downloaded from the Microsoft website.
Содержание Hyperion X5 2D
