©
2014 myPhone. All rights reserved.
myPhone S-Line
ENG
Tech specification:
•
RAM Memory: 1GB
•
16GB internal memory
•
1800mAh battery
•
input and output charger parameters: 100-240V AC, 50/60Hz,
150mA
-
output: 5V DC, 1000mA
•
Power the phone under standard conditions:
-
5V DC, 500mA
•
Smartphone`s weight: 138g
1.Before first use
SIM card inserting
myPhone
S-Line
is
a
mobile
phone
using
Dual SIM technology. Dual SIM allows you to use two mobile networks at the
same time. To insert the SIM card correctly follow the instructions:
•
Turn off the phone, remove the back cover (undermining the slot located
in the left corner of the base of the phone with your nail) and pull out the
battery.
•
Insert the SIM card into the slot following the pictures from above and
below the socket.
MICRO SIM ADAPTERS
Do not install hollow (with no card) micro-SIM card adapter in your
smartphone. This will cause a jam. Attempt to draw jammed adapter back from
the slot can cause mechanical damage of the phone. If SIM card adapter
deadlocks in the socket, you should contact an authorized myPhone service!
Memory card inserting
Use only memory cards compatible and approved by myPhone. Incompatible
memory card may damage itself and the device and remove stored data.
Incompatibility of memory card can be caused by incorrect card format (micro
SD format is required) or unsupported card size (over 32GB). To insert the
memory card correctly follow the directions:
•
Turn off the phone and take off the back cover (undermining the slot
located in the left corner of the base of the phone with your nail).
•
The memory card slot is located above the battery on the right.
Following the drawing insert the memory card into the slot.
Battery inserting
To insert the battery:
2
