©
2017 myPhone
. Wszystkie prawa zastrzeżone.
City XL
another charger, intended for this type of equipment. If in doubt contact the seller or manufacturer
service. Use only chargers and wires recommended by the manufacturer. Using incompatible
chargers or cables can cause explosion of the battery or damage to your device. When the battery
is near a complete discharge, the notification is displayed on a low battery charge. To continue use
of the device charge the battery. If the battery is completely discharged the device cannot be
switched on even when the loading process is ongoing. Before the device can be turned on again,
the battery has to be charged for at least a few minutes. In case of any problems with the battery
or if in need of a replacement, the device should be delivered to the manufacturer's service center.
To charge the battery, connect the microUSB plug to the socket in the device and the USB plug to
the charger.
Incorrect charger connection (USB cable) can cause damage to the AC adapter or the
device. The damages resulting from improper handling are not covered by the warranty.
Plug the charger into the wall socket. Once you start charging, an icon of the battery situated in
the upper right corner will change to an animated symbol of lightning. If the device is turned off an
animation depicting the level of battery charge should appear.
The device can heat up during charging. It is a regular occurrence and should not affect
the stability or performance of the device.
When the charge reaches 100% it means that the battery is fully charged, finish the charging.
Unplug the charger from the from the wall socket and from the smart phone.
If the phone does not charge properly deliver it (with the charger) to a service center of
the manufacturer.