MYOSWISS The Myosuit, Руководство пользователя

Страница: 37 / 53

M Y O S U I T – U S E R M A N U A L
Page 37 of 53
Training with the Myosuit
Ensure that the Myosuit is donned properly on the user before
starting the training session. The harness should sit comfortable
on the shoulders and both knee orthoses should be donned on the
user.
Once the training session has been configured, a long press of the action button will start the training session. At
the beginning of each training session, the Myosuit will first need to calibrate its sensors. The operator should
instruct the user to stand still for a few seconds (Figure 4.1.4; left). Following the calibration, the Myosuit is ready
to start with the training session and a screen informing the operator that the system is ready for training will
automatically appear (Figure 4.1.4; right).
A long press of the action button will move the system into transparency mode. The first time the Myosuit goes
into transparency mode in a training session it will first apply some initial tension to both tendons.

Following the long press of the action button will be the first time that
the Myosuit applies tension to the tendons. The operator should inform he user
that small pull will happen.
Figure 4.1.4. At the beginning of training, the Myosuit first calibrates its sensors. Once the calibration is done, it will automatically move
on to the following screen.
The Myosuit has four modes of operation when training. Each mode is also represented by an icon and a
corresponding color that is reflected on both the remote control and the light indicator.