MYOSWISS The Myosuit, Руководство пользователя

Страница: 36 / 53

M Y O S U I T – U S E R M A N U A L
Page 36 of 53
Configuring a training session
The Myosuit is pre-loaded with several operators and users. For each training session, the operator must then
first select who is the current operator and user who will be performing the training.
Once the Myosuit is turned on and the initialization is complete, the splash screen will disappear, and the operator
is asked to select the operator that will be conducting the training session. To configure a training session, the
operator should:
1. Select the operator who will guide the training session from a list of available operators,
a. Move down the list of available operators by a short press of the navigation button.
b. Move up the list of available operators by a long press of the navigation button.
2. Select the user who will be training with the Myosuit from a list of available user profiles, and
a. Move down the list of available operators by a short press of the navigation button.
b. Move up the list of available operators by a long press of the navigation button.
3. Review the session’s parameters.
a. The review screen gives the operator the opportunity to review the sizing parameters for the
selected user. These can be used during the preparation of the Myosuit.
Figure 4.1.3 Navigating the configuration screens.