Your Broadband VoIP Phone Service
My Net Fone Pty. Ltd.
A.B.N. 73 109 671 285
- 6 -
SNOM 320/360
First connect one end of the handset cable to the handset and then
to the jack
on the right-hand side (handset symbol) of the phone’s
bottom. Next plug the Ethernet (network) cable into the RJ45
connector labeled “NET”, and plug the other end
into your Linksys
Switch (PoE Ports 1-6, 13-18)
. The second RJ45 connector, labeled “PC”,
can be used to connect a PC.
PC
NET
Handset
Figure: Attaching Network and Handset Cables
Phone Boot-up
• The phone will execute a boot-up sequence when the Ethernet cable to PoE
switch is connected.
The phone tries to register your account name. The idle screen appears. Your
registration has been successful if the identity is shown in the top line. If,
however, the letters “NR“ is shown instead, the registration has not been
successful then contact
MyNetFone Business Support –
1300 887 899.
