Your Broadband VoIP Phone Service
My Net Fone Pty. Ltd.
A.B.N. 73 109 671 285
- 4 -
Phone Boot-up
• The phone will execute a boot-up sequence when the Ethernet cable to PoE
switch is connected.
• During this sequence, the display will first show
LINKSYS®
and then
“Initializing Network”.
• All of the lights on the phone will flash.
• After the sequence, which should take about five seconds, the phone will
display the standard menu for the phone.
• The date, name and number of the phone will display on the top line of the
LCD screen.
At the bottom of the LCD screen redial, dir, cfwd and dnd are displayed over
their associated soft buttons. A small arrow appears next to dnd indicating
that more menus can be accessed by pushing the right side of the navigation
button.
If the phone does not provide this screen, re-confirm installation and
connections. If these are correct, try unplugging the phone and plugging it
back in again. If you still don’t see the display, then contact
MyNetFone
Business Support –
1300 887 899
Attaching the Desk Stand
1 -
Line up the tabs on the desk stand with the slots on the back of the phone.
2 -
Slide the bottom tabs into the slots
3 -
Lightly press down on the top of the desk stand. It should easily slide into
the top slots. Do not force.
Desk Stand Attached to Phone
