MyManga CLASS II, Руководство пользователя

Страница: 23 / 32

23
9.8. Connecting an External Device
Connecting to the USB port
The device comes with one USB 2.0 port compatible with USB devices.
Once you plug a USB device into an USB port, Windows automatically loads a driver for that device.
After the driver has been loaded one time, you can disconnect and reconnect the same device
without performing any additional steps.
Note:
If Windows requires you to install the driver before connecting, check the documentation
provided by the device’s manufacturer before connecting the device
To disconnect a USB storage device, make sure you tap the Safely Remove Hardware icon in the
notification area of the taskbar. As well make sure that all data transfer has finished.
Finally, a notification will be displayed allowing you to remove the device.
Note:
If your USB device uses a power cord, connect the device to a power source before
connecting it.
Connecting to the HDMI port
To connect to the HDMI port follow the below steps:
• Turn off the external device;
• Locate the our HDMI port on your tablet;
• Connect on end of your HDMI cable to the port and the other end to the
HDMI port on the external device;
• Turn on the external device. When connecting a TV, you may need to configure your TV to
external device mode;
• Open the settings screen, select "System" and then "Display";
• Tap "Multiple displays" to open the drop-down list;
• From the list, select your desired monitor mode;
• Tap "Apply" and confirm the settings.