MyManga CLASS II, Руководство пользователя

Страница: 13 / 32

13
6. CHARGING YOUR MYMAGA
If you are charging the device for the first time, it will take around 4 to 5 hours to be fully charged.
To charge your mymaga device:
1.
Plug the USB head of the cable into the
adapter.
2.
Plug the micro-USB head of the cable - with the
side marked with “B” or an icon facing down - into
the micro-USB port on your tablet.
3. Plug the adapter into a wall-socket.
Note: If the remaining power in your battery capacity is 90% or above, plugging the adapter
will not fully charge your battery.
Connecting the charger improperly may cause damage to the device. Damages caused by misuse
are not covered by the warranty.
The device can be used while it is charging, but the charging process may take longer.
It is normal for the device to become warm during charging for long periods of use. If the device is
not charging properly, visit mymaga online support available in
http://mymaga.eu/en/mymaga/support
or contact the retail center where you acquired your
device.
Do not leave your device connected to the power supply once it is fully charged.
Once it is fully charged, unplug the charger from the device, and then unplug it from the electric
supply. Use only products produced by JP-IK, like chargers, batteries, and cables. Unapproved
chargers or cables can damage the device or the battery.
Warning: Only use the bundled power adapter. Unplug your device from the power
supply once it is fully charged. mymaga devices are not designed to be left
connected to the power supply for long periods of time.
5.4. Installing microlens
With just a few steps you can turn your tablet into a microscope.
To do that please follow the below steps:
• Gently press the microlens over the rear-facing camera. Make sure
the bottom of the lens is fitted into the outer rim of the camera.
• Activate the camera app
• Gently put the lens on the object/s you want to observe.