www.hygienesuppliesdirect.com
Safety instructions for MYESG01:
• Please read the operating instructions thoroughly and
observe the safety instructions
• Only coating materials such as paints, enamels, varnishes, etc,
with a flash point of 32
°
C and above may be sprayed.
• The device may not be based in work places which are covered by the
explosion protection regulations.
• When spraying, ensure that there are no sources of ignition, e.g. open
fire, cigarettes, cigars, and pipes, sparks, glowing wires, hot surfaces,
etc, in the area.
• When working with the device MYESG01 inside and outside care must
be taken that no solvent vapours are sucked into the device.
• When outdoors observe wind direction. When working indoors ensure
that there is sufficient ventilation.
• Do not spray at the device.
• The device is only splash-proof when the air hose is correctly
connected.
• Do not let children play with the device. Keep out of reach of children.
This is NOT a toy.
• Care must be taken not to damage the cable. If the cable is damaged
take it immediately to an authorised customer service centre to be
changed.
• Remove mains plug from socket when not in use.
• Repairs to electrical parts should only be carried out at an authorised
customer service centre.
• Do not use spray guns to spray flammable liquids.
• Do not clean spray guns with flammable solvents.
• Take precautionary measures against potential hazards from spray
liquids and follow any instructions given on containers or laid down by
the manufacturer of liquid.
• Do not spray any liquids of unknown hazard potential.
• Keep work area clean and well illuminated.
• Do not operate the paint sprayer in an explosive atmosphere, such as
in the presence of flammable liquids, gases or dust.
3
MYESG01_Paint_sprayer_Manual 22/12/16 08:56 Page 3
