Zone 1: All circuits in this zone must be protected with a 30mA
residual current device (RCD). It is good practice to use
IPX5
in this zone.
Zone 2: Appliance in this area must have a minimum
IPX4
rating.
Zone 3: This area must be outside of the water spray zones 0, I
and 2. No special requirements are needed in this area.
Our product attains
IPX4
, so it can be installed in Zone 2 or
Zone 3.
Make sure that the distance from walls and objects is respected
INSTALLATION OF TOWEL RAIL
：
Turn the product around and install the towel rail from top as below figure 1
and fix it with 4 screws on the rear cover as below figure 2.
figure 1 figure 2
BEFORE INSTALLATION ON THE WALL:
M6*15mm
ø 10mm
x4
M6 x 50mm
B
A
x4
C
0
1
2
3
4
5
cm
6
7
Tools needed (not provided)
