10 |
| 11
INSTRUCTION
MANUAL FOR MODELS
| TIME AND DAY SETTINGS
• Press
for 3-4 seconds, the screen will flash “ ”, press
and
to choose
the current day, 1 for Monday, 2 for Tuesday etc. When the current day is reached
press
to confirm the current day setting.
1
Monday
2
Tuesday
3
Wednesday
4
Thursday
5
Friday
6
Saturday
7
Sunday
• After pressing
to confirm the day setting the screen will display “ ”. Press
and
to set the current hour. When current hour is set press
to confirm.
• After pressing
to confirm the current hour setting the screen will display “ ”.
• Press
and
to set the current minute.
• Press
to confirm all settings.
Please note: If the unit is in standby mode the unit will keep the clock and day settings.
Depending how long the unit is switched off at the mains or unplugged, the clock and
day may need to be reset when powered back up.
| HEATING MODE
• Press
to enter mode selection. By pressing
, heating mode runs in a
continuous cycle as below:
•
Comfort mode: Press
and
to set the temperature from 5-35 ºC.
•
ECO mode: Press
and
to set the temperature from 1-31 ºC.
Note: ECO mode=Comfort mode - 4 ºC.
• Use of countdown timer: In standard heating ECO or Comfort mode you can leave
the model on permanent or programme the countdown timer so the unit turns off
after your set hours have elapsed, press the
button once and the “
” will
flash, using the
or
key choose your set hour from 1-24 hours, once chosen
press
the and the display will revert back to your set temperature, the
will
illuminate to show you have set the countdown timer. The clock will countdown 1
hour at a time from your set hours and turn off when your set hours have counted
down. You can check the set countdown hours left by simply pressing the
once
and once again to revert back to set temperature.
• Anti-frost mode: Press the
button until the screen displays“
”. In this mode
you cannot set the countdown timer or adjust the temperature or set the window
open function. The target temperature is 7ºC, if the room falls to 7ºC or below, the
unit will operate. This is a preferred mode for garages, caravans etc.
Using the Preset programmes 1 and 2:
Note: Clock and day setting must be set for correct usage of P1/P2 programs. It is
advised to set day and clock in advance for the programmes to work correctly.
Programmes P1 and P2 are not adjustable and are pre-set.
To choose programme P1 or P2 below press the
button until P1 or P2 is chosen. Set
your preferred room temperature by pressing the
or
button. Once temperature
is chosen, the display will revert back to the chosen programme P1 or P2. The unit will
now operate in P1 or P2 programme.
See below for pre-set settings over a 7 day period for programmes P1 and P2.
• P1 (Figure 1) is a preset programme Monday-Sunday. See image below for P1 preset
programme which shows the unit settings in a 24hr period which will repeat over a 7
day period. (The image below (Figure 1) is just for illustration purposes only and not
shown on the LED display.)
P1: (Monday-Sunday) preset program.
00:00am – 01:00am
comfort mode, 01:00am – 07:00am ECO mode and
07:00am – 00:00am
comfort mode.
Figure 1
• P2 (Figure 2) is a preset programme Monday-Friday and Saturday - Sunday. See
image below for P2 preset programme which shows the unit settings in a 24hr period
which will repeat over a 7 day period. (The images (Figure 2 and 3) below are just for
illustration purposes only and not shown on the LED display.)
P2:(Monday-Friday) preset program
00:00am – 01:00am
comfort mode, 01:00am – 05:00am ECO mode,
05:00am – 09:00am
comfort mode, 09:00am – 19:00pm ECO mode,
19:00pm – 00:00am
comfort mode.
