6 |
| 7
INSTRUCTION
MANUAL FOR MODELS
| SPECIFICATIONS
Model No.
RATED VOLTAGE
RATED POWER
MHPH05-10E
AC230-240V, 50-60Hz
1000W
MHPH05-15E
AC230-240V, 50-60Hz
1500W
MHPH05-20E
AC230-240V, 50-60Hz
2000W
| STRUCTURE AND PARTS
1
2
3
1 - Out-let
2 - Body
3 - Control panel
| INSTALLATION ON THE WALL
≥300mm
ø 8mm
Image 3
Image 4
Image 5
Image 6
Image 1
Image 2
≥
300mm
≥
300mm
≥
300mm
≥
300mm
MHPH05-E
Figure 1
• For wall mounting, carefully remove the already constructed hanging bracket from
the rear of the heater by turning the two plastic securing grips located at the top of
the bracket. It is good practice to remove the bracket and replace a few times so you
are familiar on how it attaches before securing to the wall.
• Using the hanging bracket as a template, place the hanging bracket level against the
wall as a guide ruler (please make sure the holes are parallel level), use a marker
pen to mark the hole position. Image 2 on Figure 1 above.
• Drill holes on the wall with Ø8mm drill bit. Image 3 on Figure 1 above.
