MYIRO myiro-9 Скачать руководство пользователя страница 3

Safety Precautions

To ensure correct use of this instrument, read the following points carefully and adhere to them. After you have read this manual, keep it in 
a safe place where it can be referred to anytime a question arises.

 WARNING

Failure to adhere to the following points may result in death or serious injury.

Do not use the instrument in places where flammable 
or combustible gases (gasoline, etc.) are present. 
Doing so may cause a fire.

Do not disassemble or modify the instrument or the AC 
adapter. Doing so may cause a fire or electric shock.

Always use the AC adapter supplied as a standard 
accessory or the optional AC adapter, and connect it to 
an AC outlet of the rated voltage and frequency. If an AC 
adapter other than those specified is used, it may result 
in damage to the unit, fire or electric shock.

Take special care not to allow liquid or metal objects to 
enter the instrument. Doing so may cause a fire or 
electric shock. Should liquid or metal objects enter the 
instrument, turn the power off immediately, disconnect 
the AC adapter plug from the AC outlet, and contact 
your retailer.

If the instrument will not be used for a long time, 
disconnect the AC adapter plug from the AC outlet. 
Accumulated dirt or water on the prongs of the AC 
adapter’s plug may cause a fire and should be removed.

The instrument should not be operated if it is damaged 
or the AC adapter is damaged, or if smoke or odd smells 
occur. Doing so may cause a fire. In such situations, 
turn the power off immediately, disconnect the AC 
adapter plug from the AC outlet and contact your 
retailer.

Do not forcibly bend, twist, or pull the AC adapter 
power cable. Do not scratch or alter the power cable or 
place heavy objects on it. Doing so may damage the 
power cable and cause a fire or electric shock.

Always hold the plug itself when disconnecting the AC 
adapter plug from the AC outlet. Pulling on the power 
cable may damage it and cause a fire or electric shock.

Insert the power plug fully and securely. Incomplete 
inserting may cause fire or electric shock.

Do not insert or disconnect the AC adapter plug from 
an AC outlet with wet hands. Doing so may cause 
electric shock.

 CAUTION

Failing to adhere to the following points may result in injury or damage to the 
instrument or other property.

Do not place the instrument on an unstable or sloping 
surface. Doing so may result in its falling or 
overturning, causing injury. Be careful not to drop the 
instrument when carrying it.

Make sure that the AC outlet is located near the 
instrument and that the AC adapter plug can be 
connected to and disconnected from the AC outlet 
easily.

Do not open the cover during scanning. If the cover is 
opened during scanning, there is a risk that your hand 
might get caught in the instrument, resulting in injury.

When cleaning, disconnect the power plug. Cleaning 
with the power plug connected may result in electric 
shock.

1

Содержание myiro-9













































Отзывы: