MYiR MYC-C8MMQ6-8E2D-160-I, Руководство по разработке на Linux

Страница: 37 / 50

5.2 Configure QtCreator
It is necessary to configure the toolchain in QtCreator if your want the program can run on the development baord.
perform below command to start the qtcreate.
Make a new configure
：
Configure a gcc and g++ compile
Configure a QTversion
Configure a QTdebug
Add a new device
Create a kit and add the above 4 items together to compile the QT configuration
1.Configure GCC and G++
After started Qtcreator, first open a sample, make the "project" become configurable, and then click "Project" -> Manage kits, as
shown below.
Figure 5-2-1 Qtcreate interface
Then go to "Options" -> Compiler -> "Add" -> GCC->C/C++. The process is as follows:
5.2 Config QtCreator
37