PIN#4
Power supply to camera
PIN#5
Video input
D)
VideoTX
Connect the VideoTX to this port.
插针
用途
PIN#16
GND
PIN#17
Power supply to VideoTX
PIN#18
Video output
PIN#19
Audio output
E)
Sensors
This port is for current sensor, battery voltage sensor and RSSI input.
The Current sensor has a 4pin connector. Please plug the connector to PIN#6~PIN#9. Please
notice that the black wire of the current sensor should be aligned to PIN#9.
After connecting the current sensor, the PIN#20 is for RSSI input is still visible. Connect the
RSSI signal from your RX to it. The RSSI input is buffered inside the AP. So there is no need to
use any external circuit to buffer your RSSI signal any more.
插针
用途
PIN#6
Voltage sensor
PIN#7
Current sensor
PIN#8
+5V power supply to the sensor board
PIN#9
GND
PIN#20
RSSI
F)
Data
