A)
Power
This port supplies power to the TFPro. The TFPro has its own switching power unit so it can
be powered from 7-20V. But if you want to share this power with the camera and the video
transmitter, we recommend you to power the AP with a 3S lipo since most of the camera and
video TX need 12V.
pins
Use for
PIN#1
12V positive
PIN#14
Ground or negative
B)
CAM/VTX Power
PIN#2 is connected with PIN#1 internal. PIN#15 is the power supply pin for Camera and
VideoTX.
So if you want to share the Power with CAM/VTX, just plug a jumper cap to PortB (PIN#2 and
PIN#15).
If you want to use a separate power for CAM/VTX, please connect it to PIN#15.
pins
Use for
PIN#2
TeleFlrPro Power
PIN#15
Camera/VideoTX Power
C)
Camera
Connect your camera to this port.
pins
Use for
PIN#3
GND
