Myenergi zappi, Руководство пользователя

Страница: 12 / 42

9.2 RGB Indicator Key
The lighting flash indicator on the front of the
zappi
indicates the status of the charge. The default colours are:
Pink: Connected
Green: Charging 100% Green
White: Charging from Grid only
Yellow: Charging mix of grid/green energy
Blue: Charge complete
Red: Error
These colours can be adjusted on Display & Sound menu (firmware version 2.163 onwards).
The colour effect (pulsing of the LED brightness) varies according to the charging power.
9.3 Display
1. Import / Export
Power The power being either imported or exported from or to the grid (kW).
The direction of the arrows indicates if the property is currently
importing power (left) or exporting power (right).
The size of the arrows is proportionate to the level of power being
imported / exported, When the property is neither importing or
exporting power the figure will be 0.0kW and there will no animated
arrows. The property is then said to be 'in balance'.
2. House Load
Power The power that the property is currently using in kW. ( Note : This is
displayed only when the Generation Sensor is installed directly to a CT
input or a
harvi or other myenergi device)
3. Status Text The current status is displayed here (see Status Screens)
4. Generation
Power The power being generated at this time in kW. ( Note : This is displayed
only when the CTs are installed either hard wired to the CT inputs of the
zappi
or wirelessly to a
harvi
or other
myenergi
device)
5. Lock Icon Operation lock is active.
6. Date & Time The current date and time.
7. Mode Icons These icons indicate that the import limiting is active (house), Demand
Side Response (~) or the
eSense input is live (e)
8. zappi Icon If you see wavy lines above the zappi icon, the unit is thermally limiting!
The output power is temporarily reduced.