9
The MWC2-9 receiver uses the MYE Entertainment Secure Grip Mounting Band. Mounting the MWC2-9 is now
quick, secure and discrete. It is required that the Secure Grip Mounting Band always be used when installing
MYE Entertainment MWC2 receivers.
Atta
ching the Receiver
Wrap the Secure Grip Band around the intended
mounting pole and cut to fit. Do not overlap ends or
have a gap over 1/8”. Secure the Grip Band with 1
MYE nylon tie in the center channel. OFFSET the
knuckle of the nylon tie from center by approximately
1/4”.
Trim the excess nylon tie completely.
Install the Mounting Base over the nylon tie
knuckle. Insert two MYE nylon ties into the holes
opposite the tie knuckle hole.
Seat the nylon ties into the corresponding
channels of the Secure Grip Band.
Pull the nylon ties tight to align all 3 tie knuckles.
Trim all excess nylon tie completely.
Before you begin: Unscrew the MOUNTING BASE ASSEMBLY from the receiver by using the
FRONT MOUNTING SREWS. (See page 3 – Receiver Assembly Front View.)
