6
Programming - Far/Near Reception
This feature provides the ability to set the reception sensitivity of each MYE
MWC2-9 receiver depending on the proximity between the receiver and
transmitter.
Far Mode: (Default): The far mode is the most widely used and will accommodate
the majority of installations.
Near Mode: The near mode is used primarily in situations where the MWC2-9
receiver is positioned very close to one or more transmitters. The Near Mode is
recommended when receivers are installed between 1 and 5 feet from a
transmitter.
Far / Near Mode
Note: The factory default is set to “Far” (HI).
To change to “Near” mode (LO):
1. Start with the MWC2-9 in the OFF position.
2. With the unit OFF, press and hold the Volume UP button.
3. While holding the Volume UP button, press and release the POWER
button.
4. Wait three seconds while continuing to hold Volume UP button until ‘LO’ is
appears on the display.
5. To revert back to Far mode simply follow steps 1-4 until “HI” appears on
display.
DISPLAY
and
ICON IDENTIFICATION
FAULTY
HEADPHONE
JACK ICON
VOLUME
LEVEL
INDICATOR
CHANNEL
ICON
CURRENT
CHANNEL OR
FM FREQUENCY
900MHz MODE
SELECTED
MUTE “ON”
EQ PRESETS
FREQUENCY
PRESET ICON
FM FREQUENCY
ICON
FM RECEIVER
MODE
SELECTED
