manualshive.com logo in svg

MYDATA MY500 JetPrinter, Руководство по обслуживанию

Поделиться
Скачать
MYDATA MY500 JetPrinter Скачать руководство пользователя страница 27

MYDATA

MY500 JetPrinter  

Installation

P-030-0014-EN – Service Manual

Rev. 0003  2008-06

2 - 3

Shipping gross weight

The shipping gross weight depends on the quantity of delivered options. An 
usual gross weight is the machine weight plus roughly 100 kg.

The site

The floor at the machine site must be level.

It is recommended that the area at the machine site is ESD (Electrostatic 
Discharge) protected.

Cable for mains, tube for pneumatic air, and cable for computer network are 
connected to the machine at the rear (shown in Figure

2-3

). The machine is 

delivered with two network cables. One cable, 1 m of length, for the 
connection of the offline station to a gateway. One cable, 30 m of length, for 
the connection of the MY500 JetPrinter.

CAUTION! Always make sure that the way cables and tubes are placed do not 
present a hazard. Always use cable ties or such to bundle them together, or 
place in cable channels.

The machine noise is maximum 68 dB (A).

Machine dimensions

All dimensions shown in Figure

2-1

 are in mm.

Figure 2-1.  Main dimensions.

Содержание MY500 JetPrinter

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды