manualshive.com logo in svg

MYCS GRYD, Руководство пользователя

Поделиться
Скачать
MYCS GRYD Скачать руководство пользователя страница 3

3

Introduction

883.101.00

GRYD Manual

Keep fittings out of children‘s reach and keep children away from the construction area. 

For proper and safe assembly, please use only the fittings and furniture elements delivered in the original 
packages. This product should only be placed on firm, level ground. Do not use any abrasive cleaners. 

Please clean only with a duster or a damp cloth. We would like to inform you that a secure mounting only is 
as good as the connection between the mounting material (dowels) and the type of wall structure. Unless 
you ordered an assembly service, MYCS GmbH cannot judge the state of the wall structure. The assembler 
assumes final responsibility for the dowels used. 

Use only dowels suitable for that particular type of wall. The appropriate dowels are available in any 
hardware store along with the necessary advice from experienced personnel. Unless you ordered an 
assembly service, MYCS GmbH does not assume any liability for improper assembly or use of unsuitable 
mounting materials for the wall structure.

WARNING

Содержание GRYD





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды