No.QT33-04003A
WARNING
CAUTION
Do not attempt any type of works such as moving the machine, wiring, maintenance,
checking while the power is on. It is recommended that such works should be done only when
more than ten seconds have elapsed after the power is off. Otherwise, it may cause electrical
shock.
Do not touch this product with wet hands while the power is on. Otherwise, it may cause
electrical shock.
Connect the protective earth terminal (PE) properly to it on your equipment, as illustrated in
this user’s manual. Otherwise, it may cause electrical shock.
Use this product which installed properly in the enclosure. Otherwise, it may cause electrical
shock or injury.
Do not leave the cover off from the terminal block while the power is on. Otherwise, it may
cause electrical shock or injury.
Fix this product securely onto your equipment. Otherwise, it may cause injury.
Do not touch this product while it is running or right after it is stopped. Otherwise, it may cause
injury, as its surface remains hot.
Depending on the setting of this product, it may show an unexpected operation when
recovering from overheating. Please read this user’s manual carefully and pay a special
attention.
Use a DC power supply with reinforced insulation for dangerous voltage. Otherwise, it may
cause electrical shock.(Only DC input type)
Do not use or store this product under a dusty environment. Otherwise, it may cause
malfunction.
Do not give a big shock to this product. Otherwise, it may cause malfunction.
Do not use or store this product in a place of high or low temperature, or under an environment
of extremely high or low humidity. Otherwise, it may cause short circuit to your device or
further damage.
Do not install this product in a place where a dew is generated. Otherwise, it may cause short
circuit to your device or further damage.
MYCOM is, in no way, responsible for any damages or malfunctions that are caused by user’s
repair or modifications on this driver. If the user performed these initiations and the driver does
not work satisfactorily, a warranty will not be provided.
When giving up the use of the driver, dispose it according to an appropriate regulation on the
industrial waste.
Please do not remove the name plate.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
