mychway YH-6505, Руководство пользователя

Страница: 41 / 73

10. Please turn off the power switch of the device, and ensure that the total power
supply of the device is turned off before the staff leaves after daily use, so as to
ensure the safety of the electrical products.
11. Use device or train device operators in strict accordance with instructions in the
user manual.
12. When taking other weight-loss drugs, it is recommended to stop taking them for 1
to 2 months before treatment. Extension of the course of treatment is recommended
if you wish to lose weight immediately.
13. Don't use the instrument with an empty stomach. After a full meal, wait at least 1
hour before a course of weight loss treatment.
14. When operating, the instrument should fully touch the skin to avoid uneven heat.
15. Start from the lowest energy level and slowly add up.
16. When using this device, the operating parts must be kept moist and dry skin
should be avoided.
17. Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene and prolong its service life.
18. Must apply products with higher oil content and keep it moist.
19. Please inform customers in advance that tinnitus will occur when operating 40K
ultrasound.
20. Do not use the 40K ultrasonic operating head on waist, back, and breasts.
21. Ensure to apply the gel evenly before operating the 40K handle.
22. Do not stay in the same area for more than 3 seconds to avoid skin burn when
using the RF operating head.
23. RF, ultrasonic, etc. operating heads can be used separately. Use several operating
heads together will have a better effect.
24. Do not stay in the same area for more than 3 seconds to avoid detoxification when
operating face vacuum RF.
25. The operating part needs to be evenly applied with essential oil or special RF
cream before operating vacuum RF, and avoid using thick products to prevent the
handle blockage.
5. Troubleshooting & Solutions
1. The instrument cannot be started, but the key light on the back of the instrument
does not work?
A. Make sure the power cord is connected to a valid power socket.
B. Whether the fuse tube on the back of the instrument is loose or burnt out.
2. No RF output of the instrument?
A. Please check whether the plug connecting the instrument handle and the body is
tightly connected.
B. Please check whether the treatment area has been cleaned. Grease or oil essential
oil products may cause poor contact between the treatment handle of the instrument