
absorption.
Technique: apply hydro face mask if you have sensitive skin. Apply
blackhead-removing liquid to T zone if you have large pores and high-density
blackheads. Then, use wet tissue to cover treatment receiver’s eyes, use the hot
steam at a safe distance.
5. Cleanse pores(after the 5-mintue hot steam treatment)
Needed handpiece: Hydro Facial
Purpose: remove blackheads and whiteheads in pores and get rid of dead cells
Technique: remove the cotton wet with blackhead-removing liquid, use one hand to
wipe face with half-dry tissue and another hand to move the handpiece. Lower the
suction level when the handpiece is moved on U zone. Move the handpiece in spiral
curve on T zone, or you can let the handpiece stay on the every spot of the target
area for 2-3 seconds. Turn off the handpiece after treatment.
6. Hydrate skin and contract pores(5-8 minutes)
Needed handpiece: oxygenation sprayer
Needed skin products: toner+essence( at a ratio of 2:1)
Purpose: hydrate skin and contract pores after cleansing pores.
Technique: pour toner and essence(2:1 ratio) into the the container of oxygenation
sprayer and shake the container to make sure they are fully mixed. Choose proper
essence based on individual skin’s situation. If the essence is too thick, increase the
proportion of toner. If the mixed liquid is still unsatisfactorily thick, do not begin the
treatment in case there is blockage.
7. Cleanse pores again(5 minutes)
Needed handpiece: Scrubber
Purpose: use high-frequency vibration to reduce blackheads, whiteheads and acne
into small particles and then remove them
Technique: do not wipe face dry after using the oxygenation sprayer, move the
scrubber from jaw to towards cheek line by line.
8. Cleanse face(1 minute)
9. Soothe and repair skin(5-8 minutes)
Needed handpiece: Holt&Cold( cold mode)
Needed skin products: essence/ lyophilized powder/primary liquid
Purpose: contract pores, soothe skin, smooth out wrinkles.
Technique: after applying skincare product to face, move the handpiece from jaw to
cheek in spiral curve.
10. Nutrient introduction(10-15 minutes)
Needed handpiece:Ultrasound/BIO/Hot&Cold
(
Hot mode
)
Ultrasound: stimulate cell regrowth, and help with nutrient introduction
Содержание SR-AF1323
Страница 1: ...User Manual SR AF1323...