mychway SR-AF1323, Руководство пользователя, Страница: 17 / 24

12. Make sure the rubber ring is put in place during the hydro facial treatment,
otherwise there will be no or weaken suction.
13. Make sure the target area is kept moistened to make treatment receiver feel
comfortable during treatment. Do not perform the treatment on dry skin.
14. Please inform the treatment receiver of possible sensations of micro electric
currents before treatment.
15. Cleaning the rotating tip of the hydro facial handpiece is a must, which can
prevent cross infection. Brush dirt and grime out of the tip, rinse the tip with clean
water, soak the tip in ethanol for 3 minutes and then rinse the tip again to remove
ethanol.
16. Please make sure you can distinguish the suction hole from the air outlet. Do not
connect the oxygenation sprayer to the suction hole, otherwise the machine will be
broken.
17. When you use the cold&hot function, keep your hands away from the steam
outlet to avoid discomfort.
18. The liquid used in the oxygenation sprayer should be watery fluid.
19. When you use the oxygenation sprayer on the customer’s philtrum, please let
customer change her/his way of breathing.
20. Clean the instrument with normal saline after operation to ensure its cleanliness
and hygiene and prolong its service life.
21. Use machine or train machine operators in strict accordance with instructions in
the user manual.
4. Troubleshooting & Solutions
1. The machine can not be started
？
A: Please make sure the power cord is connected to an outlet with normal power
supply.
B: Please check that the power cord is fully inserted into the outlet.
2. I can start the instrument, but the screen displays erroneous message?
A. Please unplug the power plug behind the instrument and wait for about 1 minute
before restarting the instrument.
B. If the above methods cannot solve the problem, please contact the machine dealer
for assistance.
3. The machine can be started, but a certain handpiece can not work properly? No
energy output?
A: Please check whether the start button on the control panel can be used.
B: Please check whether the handpiece is connected to the machine body properly.
C: Please check whether there is liquid medium on face, for there are obvious
sensations only when mediums are applied to the target area.
D: If it is not any case mentioned above, the handpiece may be broken. You need to
contact after-sale service staff for solution.