grounding plug) extension cord.
o
WARNING
Do not attempt to power your light
using an extension cord that does not have the
3rd grounding plug, do not use a cheater plug,
and do not remove the 3rd grounding plug from
your light. Attempting to power using one of
these methods could lead to an electric shock.
•
Make sure that the length, gauge, and wattage rating
of your plug are sufficient to handle the requirements
for your light.
•
Make sure that the cord is located so that it will not
be stepped on, tripped over, come in contact with
sharp edges or moving parts, or otherwise subjected
to damage or stress. This will reduce the risk of
accidental falls, which could cause injury and damage
to the cord, which could then result in electric shock.
•
The stand legs can be collapsed around the extension
cord safely for hand held use.
•
WARNING:
Check the extension cord for exposed
wiring or damage, as a damaged wire could lead to
fire or electric shock.
•
To switch work light to ON, press button above the
tripod to the “I” position.
•
To switch work light OFF, press button above the
tripod to the “O” position.
•
Ensure light is securely attached with tripod or hook
before working under unit to prevent injury or
damage.