14
INSTALLATION, WIRING & PROGRAMMING GUIDE
REQUIRED PARTS FOR
Compustar
INSTALLATION
MyCar Telematics device
HRN-MCAR-01
Compustar CM7200
BLADE-AL (64)
STEP 1. CONFIGURE THE REMOTE STARTER
The ADS Weblink (ADS-USB) is required to properly configure the Compustar remote starter to accept the
MyCar telematics device. When flashing the Compustar remote starter,
please ensure the remote starter
firmware and BLADE-AL (64) firmwares are updated to the latest firmware available.
STEP 2. CONNECT
(1)
Connect only when remote starter is not supplying power to telematics device
3
(+) HORN (PULSE)
OR
(+) SIREN (CONSTANT)
ANALOG INPUT SIGNAL
FOR ALARM DETECTION
(+)
12V BATTERY
(1)
GROUND
(1)
+12V Ba
tt
ery
(RED
)
Gr
ound
(BLA
CK
)
Da
ta
(WHITE
)
Da
ta
(BL
UE
)
Alarm(+)
(YELL
O
W
)
Installation:
Place module 3 inches
(minimum) from any metal surface
Orientation:
Horizontal; small door
facing upward (as seen in this diagram)