BOOKLETMAKER FOLDNAK M2
6
5. TROUBLESHOOTING
Machine is switched on, but the light inside the ON/OFF-Selector (7) is not on
The power cord is plugged in improperly: Push power cord thoroughly into power
outlet.
Circuit braker has been activated:
Push circuit braker button in again. It is
located at the machine’s rear, beneath the
power cord outlet.
Internal problem:
Contact your dealer.
Button "START" (6) is being pushed, but machine does not work
Cover (5) is open:
Close cover.
Staple jam inside staple channel:
Take off stapling head, remove both
screws of front plate (18), take off front
plate. Remove jammed staple, clean staple
channel and reassemble.
Jam of the moving parts because too
much paper has been inserted:
Push button „RESET“ (9) for a few sec-
onds. The machine then runs backwards,
enabling the operator to pull out jammed
paper.
Circuit braker has been activated:
Push circuit braker button in again. It is
located at the machine’s rear, beneath the
power cord outlet.
Internal problem:
Contact your dealer.
