BOOKLETMAKER FOLDNAK M2
3
COMPONENTS DELIVERED
BOOKLETMAKER FOLDNAK M2 with two stapling heads, bag with two knurled
screws (1), 5.000 NAGEL-Staples 26/6, instructions manual.
1. SETUP
Screw in the two knurled screws (1). Plug in the power cord.
2. LOADING OF STAPLE MAGAZINE
•
Pull staple pusher (12) back until it locks on by itself
•
Open magazine cover (13)
•
Load staples
•
Close magazine cover (13)
•
Push staple pusher (12) gently down to unlock it and guide it towards the machine’s
front side. Do not let the staple pusher snap forward because this would smash the
stick of staples.
You can use either of the three original NAGEL-Staple types 26/6 or Ri 26/6. We rec-
ommend that you use the staple types as shown below:
Staple Type:
(Use only NAGEL staples as
other staples may damage the
stapling head or lead to bad
results.)
Loop Staple
Ri 26/6
Flat Staple
26/6
Booklets (2-15 sheets)
x
x
