C B S - 8 8 0 I N S T R U C T I O N M A N U A L
12
Installing the Embossing Wheel (Optional Feature)
CBS-880 can be equipped with an optional embossing function. The embossing coder will continually
emboss characters directly on your bag. The coder uses pressure and does not use ink to print. The CBS-
880 embossing wheel is equipped for 1-line embossing with 15 characters. There are three sections so three
sets of characters are needed. Optional feature: 2-line embossing which can be purchased separately.
1.
Place the key in the groove of the embossing wheel plate and turn counter clockwise to loosen the
print wheel plate. (
Figure 12
) Remove the embossing wheel plate, as well as the o-ring (
Figure 13
)
Figure 12
Figure 13
2.
Carefully install your typesets in each of the three cavities. Once all cavities are filled, place the o-ring
and print wheel plate back in place. Using the key, carefully turn clockwise to lock wheel plate.
Make sure none of the typesets are pushed out of the cavity by holding the typesets in place as you
turn the key.
Figure 14
Figure 15
3.
Unscrew and remove the pattern knurled wheel on the sealer. Replace with the embossing wheel by
lifting the embossing wheel seat and pushing the embossing wheel in place. Please note: remove
safety cover before accessing the embossing wheel.
Содержание SealerSales CBS-880I
