MyBinding Keencut Foster, Руководство по установке

Страница: 7 / 9

7. Before fitting the cutter to the stand place the cutter on a table top and attach
the Squaring Arm
(L) using the two screws and nuts provided. When
tightening the screws ensure the arm is set at right angles to the cutting edge
using a piece of paper or card as shown.
8. Fix the scale by placing a piece of card on the cutter and up to the squaring
arm, slide the measuring stop to the back corner and fasten it. Insert a blade
(see user instructions) and cut the card by depressing the cutting head and
drawing it across the card smoothly. Measure the cut dimension of the card
and stick the scale
(M) in position such that it reads the measured dimension
(X) at the stop.
7
8 X
X
l