MyBinding GBC SignMaker 25, Руководство по установке и эксплуатации

Страница: 17 / 35

Operating Instructions
Page 5-3
S
IGN
M
AKER
25/44
©2004 General Binding Corporation
H.UPPER HEAT ROLLER:
Silicone rubber coated steel tubes heat the laminating film and compress
the heated film to the items being laminated. Heat is provided by an
internal heating element in the top main roll. The main rollers are motor
loading new film (Fig 4).
I. IDLER BAR:
The idler bars, located near each supply roll, are used to direct the film
to the main rollers. The bottom Idler Bar is movable to ease film loading
(Fig 4).
J. PULL ROLLERS:
The pull rollers, located at the back of the laminator, are motor driven.
They simultaneously pull the film and improve the quality of the laminated
item (Fig 4).
K. CIRCUIT BREAKER:
Electrical safety device, located on the back of the laminator near the
power cord, can be reset by the operator if tripped (Fig 5).
WARNING: If the breaker trips a second time after being reset,
contact your local GBC Technical Representative or dealer/distributor
for assistance.
L. FILM SHAFT:
The film shaft holds the film supply on the machine, (Fig 6).
M. LOCKING CORE ADAPTORS:
Hold and lock the rolls of film on the shafts to prevent side to side shifting,
(Fig 6).
N. FILM WEB:
Laminating film loaded into the machine.
Fig. 4
Fig. 6
Fig. 5
( Not Shown )
driven for ease of