5
0OUCH
0OUCH
2
X
X
3
0OUCH
0OUCH
Pouch
Pochette
Bolsillo
1
H535 Turbo Package Contents
North American Models:
Cord sets – Qty 1
IEC cord designed and rated for 120VAC/60Hz/10
A/1200W
Cooling Tray – Qty 1
A large 10” x 12.75” cooling tray that snaps on to the back
of the machine has been provided with your laminating
machine to help receive the laminated document and
minimize any waves to assure a flat laminated document
during the cooling process.
Cleaning Card - Qty. 1
The cleaning card is intended to be used after each session
of laminating and will help keep residue and adhesive
from getting the rollers and transferring to your laminated
documents. Simply run the cleaning card through the
machine on the hot setting in order to clean any adhesive
that may have exited the pouch and onto the laminating
machine rollers during the lamination process. By doing
this you will help maintain excellent results over the life
of the machine.
Tip Sheet – Qty. 1
A Tip Sheet was provided for use as a trouble shooting
guide should you not get the results intened or just have
general questions about laminating.
4
0OUCH
0OUCH
Pouch
Pochette
Bolsillo
Specifications
GBC HeatSeal H535 Turbo
GBC HeatSeal H535 Turbo
Electrical
120V/60Hz/ 10A / 1200W
230V/50Hz / 5A/1140W
Machine Dimensions
20.48” X 10.64” X 5.92”
620 x 200 x 126 MM
Machine Weight
21.27 LBS.
9.67 KG
Maximum Pouch Thickness
1.5 - 10 MIL
38 - 250 MIC
Maximum Pouch and Board
Thru Put Thickness
.100”
2.54 MM
Maximum Pouch Width
12.5”
317.5 MM
Speed
Up to 40”/min.
Up to 1000mm/minute
Warm Up Time
4 – 5 Minutes
4 – 5 Minutes
HeatSeal
®
H535 Turbo Laminator
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION
MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES
CAREFULLY.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN
THIS INSTRUCTION MANUAL. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS, AS
WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY DAMAGE.
THE FOLLOWING WARNING IS FOUND ON THE PRODUCT IN SEVERAL LANGUAGES.
This safety message means that you could be seriously hurt or killed if you open
the product and expose yourself to hazardous voltage.
The following ISO and IEC symbols appear on this product, and their meaning is as follows:
Special notice
Thank you for your recent purchase of a GBC Pouch Laminator. Your new laminator may emit
a slight odor during the initial stage of operation. It is normal and will diminish after several
hours of operation.
Cleaning
Caution:
Unplug this product before cleaning.
• Wipe exterior only with a damp cloth. Do not use detergents
or solvents.
• Do not use aerosol dusters or cleaners
• Do not spray anything into the product, foreign substances can
be explosive.
Important S
WARNING
Electrical shock hazard.
Do not open. No user
servicable parts inside. Refer
servicing to qualified
service personnel.
2ELEASE
/N/FF
(OT
#OLD
2ELEASE
/N/FF
(OT
#OLD
Contenu de la boîte H535 Turbo
Modèles pour l’Amérique du Nord :
Cordon amovible – Quantité 1
120VCA/60Hz/10A/1200W
Plateau de refroidissement - Quantité 1
Un grand plateau de refroidissement de 25,4 x 33,4 cm (10
x 12,75 pouces) qui se fixe au dos de l’appareil est fourni
avec l’appareil de plastification pour aider à récupérer le
document plastifié et pour maximiser les ondes afin de
s’assurer d’avoir un document laminé plat pendant le
processus de refroidissement.
Carte de nettoyage - Quantité 1
La carte de nettoyage est conçue pour être utilisée
après chaque session de plastification et empêchera les
résidus et la colle de se déposer sur les rouleaux et d’être
transférés sur les documents plastifiés. Faites passer la
carte de nettoyage dans l’appareil réglé au paramètre
chaud afin de nettoyer toute colle qui aurait pu s’échapper
de la pochette et se déposer sur les rouleaux de l’appareil
pendant le processus de plastification. Cette pratique
vous permettra d’avoir d’excellents résultats toute au long
de la durée de vie de l’appareil.
Fiche « Conseils » - Quantité 1
Une fiche « conseils » est incluse et qui tient lieu de
guide de dépannage au cas où vous n’obtenez pas les
résultats escomptés ou en cas de questions générales sur
la plastification.
Contenido del paquete H535 Turbo
Modelos norteamericanos:
Juegos de cable – Cant. 1
Cable IEC diseñado y clasificado para 120 V CA/60 Hz/10
A/1200 W
Bandeja de enfriamiento – Cant. 1
Con su máquina de laminar se proporciona una bandeja de
enfriamiento grande de 10 x 12,75 pulg. (25,4 x 32,4 cm) que
se adjunta a la parte trasera de la máquina para ayudar en
la recepción del documento laminado y minimizar cualquier
onda para asegurar un documento laminado plano durante el
proceso de enfriamiento.
Tarjeta de limpieza – Cant. 1
La tarjeta de limpieza está diseñada para usarse después
de cada sesión de laminación y lo ayudará a evitar que el
residuo y el adhesivo queden en los rodillos y se transfieran a
sus documentos laminados. Simplemente pase la tarjeta de
limpieza a través de la máquina en el nivel de temperatura
caliente para limpiar cualquier adhesivo que pueda haberse
salido de la bolsa y haya quedado sobre los rodillos de la
máquina laminadora durante el proceso de laminación. Al
hacer esto ayudará a mantener excelentes resultados durante
la vida de la máquina.
Hoja de consejos – Cant. 1
Se proporciona una hoja de consejos para usarla como
guía para solucionar problemas si no llegara a obtener
los resultados esperados o simplemente para responder
preguntas generales sobre la laminación.
Important Safeguards
WARNING: FOR YOUR PROTECTION DO NOT CONNECT THE POUCH
LAMINATOR TO ELECTRICAL POWER UNTIL YOU READ THESE
INSTRUCTIONS COMPLETELY. KEEP THESE INSTRUCTIONS IN A
CONVENIENT LOCATION FOR FUTURE REFERENCE. TO GUARD
AGAINST INJURY, THE FOLLOWING BASIC SAFETY PRECAUTIONS
MUST BE OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT.
General safeguards
• Use the unit only for its intended purposes of laminating documents.
• Do not place anything in the pouch entrance of the laminator other
than documents in pouches.
• Place unit on a secure, stable work area to prevent the unit from
falling and possibly causing personal injury and damage to the unit.
• Follow all warnings and instructions marked on the unit.
• The socket outlet shall be installed near the equipment and shall be
easily accessible.
• Do not block the vent slots, this will cause the laminator to overheat.
• Do not block the vent slots; this will cause the laminator to overheat.
• Never insert the loose end of the pouch first into the machine. This
could cause the machine to jam.
• Never attempt to do single sided lamination. This will cause the machine
to jam.
• After laminating run a clean card through the machine to clean glue residue off
of the rollers. This will extend the life of the roller
Electrical safeguards
• The unit must be connected to a supply voltage corresponding to the
electrical rating shown on the unit.
• Unplug the unit before moving it, or when it is not in use for an extended
period of time.
• Do not operate with a damaged supply cord or plug. Do not alter the
attachment plug. The plug is configured for the appropriate electrical supply.
• Do not overload electrical outlets beyond their capacity; fire or electrical
shock could result.
• The unit is intended for indoor use only.
• Never push objects through the cabinet slots. Do not spill liquid of any
kind on this product.
• Close supervision is required when this product is used near children
Service
Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact
an authorized GBC service representative for any required repairs.
m
m
m
m
m
