10
Care and Maintenance
Removing Shelves
To remove any of the shelves from the rail
compartment, move the shelf to the position
where the notch of wooden shelf is exactly
under the plastic post and lift the wooden shelf.
Please ensure these are replaced when the
shelf is put back.
Humidity Control
The wine cooler is equipped with a system for
maintaining the correct level of humidity. Fill the
small plastic reservoir (humidity box) ¾ full with
water, and fit onto the runners found on the top
shelf of the wine cooler. Check the water level
regularly and refill as necessary.
Please ensure the reservoir is positioned
correctly on the runners on the top shelf to avoid
the possibility of water spillage.
Cleaning Your Wine Cooler
Turn off the power, unplug the appliance, and
remove all items including shelves and rack.
Wash the inside surfaces with a warm water and
baking soda solution. The solution should be
about 2 tablespoons of baking soda to a pint of
water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth
when cleaning any area of the controls.
Wash the outside cabinet with warm water and
mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
Power Failure
Most power failures are corrected within a few
hours and should not affect the temperature of
your appliance if you minimize the number of
times the door is opened. If the power is going to
be off for a longer period of time, you need to
take the proper steps to protect your contents.
Vacation Time
Short holidays:
Leave the Wine Cooler in
operation for holidays of less than three weeks.
Long absences:
If the appliance will not be
used for several months, remove all items, turn
off the appliance and unplug. Clean and dry the
interior thoroughly. To prevent odour and mold
growth, leave the door open slightly: blocking it
open if necessary.
Moving Your Wine Cooler
Remove all items.
Securely tape down all loose items (shelves)
inside your appliance.
Turn the adjustable leg up to the base to avoid
damage.
Tape the door shut.
Be sure the appliance stays secure in the upright
position during transportation. Also protect
outside of appliance with a blanket, or similar
item.
Energy Saving Tips
The Wine Cooler should be located in the
coolest area of the room, away from heat
producing appliances, and out of the direct
sunlight.
Ensure that the unit is adequately ventilated.
Never cover air vents.
Only open the door for as long as necessary.
