1.
Selection of auto backlight mode.
Press
[UNIT]
to select auto backlight function, the display will show an arrow
next to
LIGHT
, this means auto backlight function active, press
[UNIT]
again, the display will not show the arrow next to
LIGHT
, this means the auto
backlight function is inactive, i.e. shut off backlight function.
2.
Selection of auto shut off mode.
Press
[ZERO]
to select auto shut off function, the display will show an arrow
next to
A_OFF
, this means auto shut off function active. Press
[ZERO]
again,
the display will not show an arrow next to
A_OFF
, this means the auto shut
off function is inactive.
3.
Return to weighing mode.
Press
[ON/OFF]
to turn the power off, press
[ON/OFF]
again to turn on the
power and the scale will return to normal weighing mode.
* Counting procedures(optional)
1.Press [ON/OFF] to turn on the scale.
Wait for "0" to appear on the display.
2.Start the Count Procedure
If necessary, press
[ZERO]
key to set the display to “0”.
3.
Place a given number of samples of an item on the pan (the Sample Size should
be either 10
、
20
、
50 or 100 pieces). The weight of these samples will show on the
display.
4.
Press the
[UNIT]
key several times to put the scale in PCS mode.
5.
Select the sample size (the same as you chose above) by pressing the
[PCS]
key.
(press it as many times as necessary to put it in the correct sample size ,the sample
size is the same as in step three =10
、
20
、
50or100.
6.
Press the
[UNIT]
key, the display will show “selected pcs”, then the scale will
remember the sample size you selected and show the starting sample size on the
display
(you can now remove the samples if you want to return the scale to 0)
7.
Place the items that you want counted onto the tray and the total number of items
will show on the display.
8.
Presses the
[UNIT]
key to exit the counting function and return to normal
weighing or you can press ON/OFF to turn the scale off to exit .
NOTE: the weight of unit sample > 10e.
i5500 COMPACT SCALE
My Weigh iBalance SERIES
INSTRUCTION MANUAL
