(turn auto
-
average on). Press key to change, press
to confirm.
(XIII) Setting backlight
Turn the scale ON, Press and hold until the end of the
self-test, the display will show “AUTO”(AUTO backlight) or
“OFF”(disable backlight) or “ON” (Backlight is ever lighting)
Press key to alternate, press to confirm.
(XIV) Setting of communication (optional)
Turn the scale ON, press and hold unitl the end of the
self-test, it will display the Baud Rate preset, select one (2400
、
4800 or 9600) by pressing , confirm it by pressing . Enter
the selection of communication modes, select one (ST—output
when the reading is stable, Co—continue output). Press
to
change and press to confirm.
RS-232 Communication format
Baud Rate : 2400
、
4800
、
9600
Data Bit
: 8
Parity : N(None)
Stop Bit : 1
Code : ASCII
Data Format: G=GROSS N=NET
6
normal weighing mode.
(II) Power off-
Push the switch to “
OFF
” to turn the scale OFF.
(III) Zero function -
Zero range: + 2% of max. capacity
Press key to return the display to zero in case there is
any zero drifting with nothing on the tray.
(IV) Tare function -
Place the container on the pan, press key to subtract
the container’s weight. When the displayed number is stable,
will be shown. Remove the container, the display will
show the gross weight companied by a negative sign. Press the
Tare key again to cancel Tare mode.
(V) Unit weight setting
A known unit weight can be inputted directly by entering
the value first then followed by pressing key.
(VI) Unit weight by sampling
1. Put the
objects intended for sampling on the pan.
2. Input the number of the objects, this number will blink in the
Unit Weight display.
3. Press Key, the calculated unit weight will then be
shown in the Unit weight display, the total quantity will then
be displayed.
(VII) Counting check
3
g
