When the scale does not read accurately, you may
calibrate it with weight. Turn the scale on; press and hold
until the end of self-test.
It will show “
CAL
”. Press to show “0”; place a weight
(2/3 of the Max. Capacity is recommended) on the tray; input
the value of the weight via numeric keys. The unit is kg. (Ex. The
Max. Capacity is 3kg; the weight should be 2kg; then enter 2).
After stable, press to confirm the entered. Now the
calibration is end. (External calibration will not work when the
error is outside the range of ±10% of Max. Capacity).
(XVI) Recharging the battery
When the battery voltage is low, the LOW POWER indicator
will be shown. Please turn the scale off and then fully recharge it,
otherwise the scale will automatically turn off. When recharging,
a LED will light up on the panel. It will turn GREEN when fully
charged. It takes approximately
8 hours
to fully charge the
battery.
Additional Remark about recharging
：
Whether scale panels “In Charge” LED or adapter’s
LED is turned into green when recharging, both mean the
batteries are fully charged. Please rest assured to use.
8
I. Overview
The CTS series electronic counting scale uses high precision
sensors and the latest Microchip technology. It is specially
designed and manufactured for accurate weighing and
counting functions. This manual is a guide and subject to
change or correction. Please check our website for the most
recent operation manual or notes.
II. Precautions Before Using The Scale
1. Do not let the scale get wet and do not place it in an
environment with extreme temperature or humidity.
2. Do not shock the scale and do not exceed the capacity.
3. If the power is low or the scale automatically power off,
please charge the battery for a full 8 hours before use.
Incomplete charging can damage the battery.
4. Before using the scale, place it on a stable platform and
adjust its feet to make the scale level.
5. Working conditions:
1) The operating temperature should be: 0
℃
~40
℃
2)
Alternative Power Supplies
：
①
7.4V / 0.4A AC/DC power adaptor
②
DC 6V/1.5Ah NI-MH batteries.
1
