My Geko Gear ORBT 956, Быстрое руководство пользователя

Страница: 8 / 20

Fatigue Driving Remind — Off(Default)/1/2/4 Hours
This feature will alerts the driver with an alarm sound.
Format Remind —Off/ 15days/ 30days(Default)/ 60days
This feature allows you to set a FORMAT REMINDER to format your Micro SD card.
Once set, the camera will remind you to format your Micro SD card at a set
interval.
Storage Space
This feature will allow you to check the storage of inserted Micro SD card into the
camera.
Total: (Micro SD Card Capacity)
Free: (Free Space of Micro SD card)
Default Setting
Here you can restore all the settings to factory default settings.
Version
Here you can check the current firmware version installed on your camera. You will
need this information in the future to check if newer version of firmware is
available.
Please visit: http://www.mygekogear.com
For latest firmware upgrade instructions.
After inserting a Micro SD card and power on, press once to stop recording,
and press and hold once and press again, then get into the photo setting.
Image Size:2M/5M/8M/12M
After inserting a Micro SD card and power on, press button once, press and
hold twice and press again,then get into the playback setting.
Speed Unit — KM/H/ MPH(Default)
You can choose desired speed option stamp to be displayed and recorded on
video stamp based on your selection.
Frequency — 50HZ/ 60HZ(Default)
To avoid the formation of bands while shooting videos under an electrical light
source, Here you should choose the frequency accordingly to your power supply
specification used in your country based on your geographical location.:
50HZ-In the UK, Africa, Australia, most of Asia and Russia
60HZ-North America, and a few other countries (Japan uses both)
Date/Time
Please set your Timezone first in system setting .
Press to select date format and hour/ minute/ second press power button
to confirm, then press to save and exit.
Screen Saver — Off(Default)/ 1 min/ 3 mins/ 5mins
On: the screen will go black and ONLY display the time after 1/3/5 minutes
Key Voice — Off/On(Default)
This feature allows you to turn ON/OFF camera button’s beep sound & any voice
confirmation.
Language — English(Default) and etc
Allow to choose your desired language of dash cam system.
License Plate Number
This feature will allow you to insert custom vehicle ID or Driver ID to be stamped
on video.
press button to choose letter/number, then press to confirm, Finally
press to save all and exit.
Timezone Setting — UTC/GMT+1 to UTC/GMT+12 & UTC/GMT-1 to
UTC/GMT-12, Default GMT +8
Photo Mode
Playback Mode