page 4
1. Align the front wheel assembly with the
front axle, ensuring you have the spring
pin (A) on the rear of the axle aligned
with the small hole (B) on the rear of the
wheel assembly.
Push the front wheel assembly onto the
axle until you hear the spring pin ‘click’
into place.
NOTE: Check the wheel to make sure it is
secure by pulling it.
1. The swivel wheels can only be locked
when in the trailing position as shown.
To lock the wheel:
position the wheel in
the trailing position and pull the swivel
lock up.
2.
To allow the wheels to swivel:
push
down on swivel lock (B).
WARNING: Always lock the swivel wheels when using the pushchair on rough surfaces.
Front wheel assembly
Using the swivel/lock function
B
A
click
B
A
