page 8
Using walker and rocker modes
12. Grip the sliding blocks at the front of
the walker on the walker base and move
them in opposite directions as shown.
13. Separate the blocks and repeat the
procedure on the rear of the walker.
14. Press the buttons (A) at each end of the walker base and at the same time turn the
base upward 90 degrees until it clicks into place. Repeat the process on the opposite
side.
To convert the rocker back to a walker, simply reverse the steps 12 to 14.
Press in buttons (A), turn base back down, close the end blocks together and
reconnect.
WARNING! DO NOT convert from rocker to walker or vice-versa whilst your child is
seated in the walker.
A
LOCK
OPEN
LOCK
OPEN